How to Install Official Wiko Selfy 3G Stock Rom
If you are looking for a way to restore your Wiko Selfy 3G to its original state, you can use the official stock ROM firmware file. The stock ROM is the same as the one that comes pre-installed on your device when you buy it. It contains the Android operating system and the Wiko customizations. Installing the stock ROM can help you fix various issues such as bootloop, lag, battery drain, network problems, etc. It can also help you upgrade or downgrade your Android version.
In this article, we will show you how to download and install the official Wiko Selfy 3G stock ROM firmware file using a flash tool. Before you proceed, make sure you have backed up your important data, as the process will erase everything on your device. You also need a Windows PC and a USB cable to connect your device to the PC.
Download Official Wiko Selfy 3G Stock Rom Firmware File
The first step is to download the official Wiko Selfy 3G stock ROM firmware file from a reliable source. You can use the link below to download the file from Needrom.com[^1^], a website that provides various ROMs for different devices. The file is in zip format and has a size of about 1 GB.
Official Wiko Selfy 3G Stock Rom
Download Official Wiko Selfy 3G Stock Rom Firmware File
Download and Install Flash Tool
The next step is to download and install a flash tool that can help you flash the stock ROM on your device. You can use SP Flash Tool, a software that supports MediaTek devices like Wiko Selfy 3G. You can download SP Flash Tool from the link below and extract it on your PC.
Download SP Flash Tool
Install Drivers on Your PC
The third step is to install the drivers that can help your PC recognize your device. You can use the drivers that come with the SP Flash Tool or download them separately from the link below. After downloading, run the setup file and follow the instructions to install the drivers on your PC.
Download MTK USB Drivers
Flash Official Wiko Selfy 3G Stock Rom Firmware File
The final step is to flash the official Wiko Selfy 3G stock ROM firmware file on your device using SP Flash Tool. Follow these steps carefully:
Run SP Flash Tool as administrator on your PC.
Click on Scatter-loading and browse to the folder where you extracted the stock ROM zip file. Select MT6582_Android_scatter.txt and click Open.
Make sure Download Only is selected in SP Flash Tool.
Turn off your device and remove the battery if it is removable.
Click on Download button in SP Flash Tool and connect your device to the PC via USB cable.
The flashing process will start and you will see a red progress bar followed by a purple, yellow, and green one.
When the green circle appears, it means the flashing is done. Disconnect your device from the PC and put back the battery if you removed it.
Turn on your device and wait for it to boot up. It may take some time for the first boot.
Congratulations! You have successfully installed the official Wiko Selfy 3G stock ROM firmware file on your device. You can now enjoy a smooth and stable performance on your phone. 29c81ba772